{"product_id":"icon-58775e-tundra-125-325-sequoia-3-425-30-vs-co-kit-w-cdev-pair","title":"ICON 58775E Tundra 1.25-3.25\"\/Sequoia 3-4.25\" 3.0 VS CO Kit w\/CDEV Pair","description":"\u003cp\u003eICON's 3.0 Series Coilovers with CDEV for 2022-2023 Toyota Tundra and 2023 ToyotaSequoia are designed to take the off-road capability of the truck to new levels by increasing wheel travel by up to 40% and significantly improving the damping ability of the front shocks.\u003c\/p\u003e\u003ch3\u003eFEATURES\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e40% increase in front wheel travel over stock\u003c\/li\u003e\n\u003cli\u003eAdjustable up to 1.25-3.25\" of front lift height over stock on Tundra or 3-4.25\" of front lift on Sequoia\u003c\/li\u003e\n\u003cli\u003eVehicle specific design and tuning for superior shock damping and control\u003c\/li\u003e\n\u003cli\u003e3.0\" Body diameter for increased oil volume and larger piston area\u003c\/li\u003e\n\u003cli\u003eICON's multi-stage, tunable hydraulic \"Bump Zone\" exponentially increases bottom-out resistance in the last 40% of compression travel\u003c\/li\u003e\n\u003cli\u003eICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061 aluminum components with a black anodized finish\u003c\/li\u003e\n\u003cli\u003ePTFE lined spherical bearings for extended longevity and minimal deflection\u003c\/li\u003e\n\u003cli\u003e7\/8\" diameter induction hardened, chrome plated shock shafts\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable and Re-tunable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Damping: Yes\u003c\/li\u003e\n\u003cli\u003eAdjustable Height: Yes\u003c\/li\u003e\n\u003cli\u003eBody Diameter (IN): 3\u003c\/li\u003e\n\u003cli\u003eBoot Included: No\u003c\/li\u003e\n\u003cli\u003eCoil Over Springs Included: Yes\u003c\/li\u003e\n\u003cli\u003eDamping Adjustment Type: Electronic\u003c\/li\u003e\n\u003cli\u003eDamping Type: Oil\u003c\/li\u003e\n\u003cli\u003eDust Shield: No\u003c\/li\u003e\n\u003cli\u003eGas Charged: Yes\u003c\/li\u003e\n\u003cli\u003eGrade Type: Performance\u003c\/li\u003e\n\u003cli\u003eLower Mount Type: Eyelet\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminum\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eMaximum Lift (IN): 3.25\u003c\/li\u003e\n\u003cli\u003eMinimum Lift (IN): 1.25\u003c\/li\u003e\n\u003cli\u003eRemote Reservoir: Yes\u003c\/li\u003e\n\u003cli\u003eService Parts: 254100G - 1 GALLON ICON PERFORMANCE SHOCK OIL\u003c\/li\u003e\n\u003cli\u003eShaft Diameter (IN): 0.875\u003c\/li\u003e\n\u003cli\u003eShock Absorber Body End Measuring Point: Top of Upper Mount Plate\u003c\/li\u003e\n\u003cli\u003eShock Absorber Rod End Measuring Point: Center of Eyelet\u003c\/li\u003e\n\u003cli\u003eSpring Color: Black\u003c\/li\u003e\n\u003cli\u003eSpring Material: Steel\u003c\/li\u003e\n\u003cli\u003eSpring Rate Type: Linear\u003c\/li\u003e\n\u003cli\u003eUpper Mount Type: Mounting Plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTECH NOTES\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 35\" x 12.50\" (Minor fender trimming and modifications may be required)\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. LIFT HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #85: ADVERTISED LIFT HEIGHT RANGES ARE FOR A STOCK EQUIPPED VEHICLE. INCREASING WEIGHT OF VEHICLE DUE TO ACCESSORIES WILL ALTER LIFT RANGE.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #149: FOR 4WD MODELS WITHOUT TRD OFF-ROAD PACKAGE ICON RECOMMENDS USING ICON DIFF DROP (PART# 55156) OR USING TOYOTA TRD AXLES (PART# 434200C020 DRIVER \/ 434100C020 PASS). FAILURE TO DO SO COULD RESULT IN FRONT AXLE DAMAGE. NOT REQUIRED FOR TRD PRO.\u003c\/li\u003e\n\u003cli\u003eRequires installation of ICON front upper control arms\u003c\/li\u003e\n\u003cli\u003eAlso requires installation of IIC kit (Part # 53508) and CDEV rear shocks (Part # 57840EP or 57845EP)\u003c\/li\u003e\n\u003cli\u003eIf upgrading a vehicle equipped with Adaptive Variable Suspension (AVS) all other vehicle systems remain functional\u003c\/li\u003e\n\u003cli\u003eMost Tundra sub-models equipped with i-Force gasoline engine will have front lift height range of 1.25-3.25\" over stock\u003c\/li\u003e\n\u003cli\u003eMost Tundra sub-models equipped with i-Force MAX hybrid engine will have front lift height range of .75-2.75\" over stock\u003c\/li\u003e\n\u003cli\u003eTundra SR5 equipped with TRD Sport Suspension package will have lift height range of 2.25-4.25\" over stock\u003c\/li\u003e\n\u003cli\u003eTundra TRD Pro will have front lift height range of 0-1.5\" over stock\u003c\/li\u003e\n\u003cli\u003eMost Sequoia sub-models will have front lift height range of 3.5-4.25\" over stock\u003c\/li\u003e\n\u003cli\u003eNot compatible with Sequoia TRD Pro\u003c\/li\u003e\n\u003cli\u003eTundra lift heights above 2.25\" require sway bar drop bracket kit part number 55154. Required for all lift heights on Tundra TRD Pro and Sequoia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCALIFORNIA WARNING: Cancer and Reproductive Harm - \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":45260741738728,"sku":"ico58775E","price":3951.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/7501\/5144\/products\/58775E_Tundra_RR_FRT_STRT_web_large_5804db99-ba42-4df9-bcd1-7c77f2e08ecc.jpg?v=1703123830","url":"https:\/\/www.shockwarehouse.com\/products\/icon-58775e-tundra-125-325-sequoia-3-425-30-vs-co-kit-w-cdev-pair","provider":"ShockWarehouse","version":"1.0","type":"link"}