2009–2011 Honda Fit KYB Shocks and Struts
KYB Excel-G replacement dampers are a relevant option for restoring control on a 2009–2011 Honda Fit. This application uses separate front struts and rear shocks, so ordering correctly requires attention to axle position and the left-versus-right front distinction.
Excel-G and the earlier GR-2 name
Excel-G is the replacement line associated with the former GR-2 branding. Its role here is conventional replacement damping for a daily-driven Fit, not a coilover conversion or a universal lowering solution. Match the vehicle’s year and suspension specification rather than assuming every part sold under either name is interchangeable.
Identify the three part references
The references for this application are 338002 for the front left strut, 338001 for the front right strut, and 348016 for the rear shock. Left and right front struts are distinct. Check the quantity sold in each listing; a rear-shock part number does not necessarily indicate that two shocks are included.
A bare strut is not a complete assembly
A replacement front strut may require transfer of the existing spring and associated hardware. Inspect the upper mounts, bearings where fitted, isolators, boots, and bump stops during the job. Safe spring handling requires appropriate equipment. Follow the vehicle’s installation procedures and alignment requirements rather than treating the work as a simple shock swap.
Keep generation and load limits straight
Do not carry these references over to a first-generation Fit simply because the vehicle name matches. Confirm the specific year-range application. Replacement damping also does not authorize heavier cargo or towing beyond Honda’s guidance. If the car sags or wears tires unevenly, investigate loading, springs, alignment, and worn joints along with the dampers.
Applications and parts
Related reading
Frequently asked questions
Which front strut is left and which is right?
The identified references are 338002 front left and 338001 front right; verify the current application before ordering.
Do these shocks increase the Fit’s carrying capacity?
No. Replacement dampers do not change the vehicle’s load or towing limits.
