Monroe Shock Measurements: 5861 to 31176

Monroe Shock Measurements: 5861 to 31176

ShockWarehouse

Monroe Shock Measurements: 5861 to 31176

Measurement reference 4 of 29. These 46 entries run from 5861 to 31176 in part-number order.

Compare the complete specification

Read Lower and Upper carefully: the table lists the lower mount before the upper mount. Loop sleeves, cross pins and stems require different hardware and mounting provisions. Mount descriptions may include sleeve ID, sleeve overall length, stem length and thread pitch. Preserve each requirement when comparing a replacement; matching compressed length alone is insufficient.

Confirm vehicle or chassis application, axle position and suspension changes before ordering. These dimensions are a comparison aid, not a substitute for the part’s application and installation requirements.

Part numbers and dimensions

  Mounts Lengths
SKU Part Type Lower Upper Comp. Ext. Trav.
5861 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 14.75" 23.75" 9"
5867 Shock Loop Bushing and Cantilever Pin Mount - 1/2" Stud Diameter X 1 5/16" Stud Length (Center of Loop to Frame) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 11.75" 19" 7.25"
5868 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.7/8" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 38.1MM Sleeve OAL 11.5" 17.5" 6"
5870 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 14.25" 23.875" 9.625"
5877 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/4" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 58.74MM Sleeve OAL 10.375" 15.875" 5.5"
5892 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 10.5" 13.75" 3.25"
5893 Shock Loop Bushing and Sleeve Mount - 5/8"-16MM Sleeve ID X 1.11/16" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.11/16" Sleeve OAL 9.375" 14.25" 4.875"
5896 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 1.3/8" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 13.125" 22.125" 9"
5897 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 1.5/8" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 16.125" 21.25" 5.125"
5906 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.1/2" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.375" 14.625" 5.25"
5921 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 1.3/8" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 8.75" 12.375" 3.625"
5928 Shock Loop Bushing and Sleeve Mount - 18MM Sleeve ID X 2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 14.375" 24" 9.625"
5930 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 2.1/8" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 53.98MM Sleeve OAL 11.875" 18.375" 6.5"
5931 Shock Loop Bushing and Sleeve Mount - 7/16" Sleeve ID X 1.3/8" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 18.875" 21.25" 2.375"
5939 Shock Loop Bushing and Sleeve Mount - 5/8"-16MM Sleeve ID X 1.11/16" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.625" 14.875" 5.25"
5947 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.11/16" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 14.375" 21.75" 7.375"
5948 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 41.28MM Sleeve OAL 14" 22.75" 8.75"
5955 Shock Loop Bushing and Cantilever Pin Mount - 1/2" Stud Diameter X 1 5/16" Stud Length (Center of Loop to Frame) Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 13.125" 21.25" 8.125"
5960 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/16" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.125" 13.75" 4.625"
5961 Shock Loop Bushing and Cantilever Pin Mount - 1/2" Stud Diameter X 1 5/16" Stud Length (Center of Loop to Frame) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 12.125" 20" 7.875"
5965 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 14.5" 19.125" 4.625"
5966 Shock Loop Bushing and Cantilever Pin Mount - 1/2" Stud Diameter X 1 5/16" Stud Length (Center of Loop to Frame) Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 13.125" 21.25" 8.125"
5967 Shock Loop Bushing and Cantilever Pin Mount - 1/2" Stud Diameter X 1 5/16" Stud Length (Center of Loop to Frame) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 12.125" 19.625" 7.5"
5968 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 14.5" 19.125" 4.625"
5969 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/16" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.125" 13.75" 4.625"
5970 Shock Special Mount Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 11.375" 18.625" 7.25"
5974 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.11/16" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 15.125" 24" 8.875"
5975 Shock Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1,9/16" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 10.5" 17" 6.5"
5984 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 1.5/8" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 16.5" 25.75" 9.25"
5986 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.7/16" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 2.3/4" Sleeve OAL 12.875" 17.875" 5"
5987 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 16" 26.25" 10.25"
5988 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.9/16" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 14.375" 24.125" 9.75"
5989 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 58.74MM Sleeve OAL 11.75" 18.125" 6.375"
5990 Shock Special Mount Stem Mount - Stem Length X M10 Thread Pitch 14.625" 21.125" 6.5"
5993 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.11/16" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 12.5" 21.25" 8.75"
5998 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.9/16" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 14.625" 23.5" 8.875"
5999 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 2" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 13.75" 21" 7.25"
31000 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 12" 19.5" 7.5"
31029 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.625" 15.375" 5.75"
31069 Shock Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 10.75" 17.25" 6.5"
31089 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/4" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 31.75MM Sleeve OAL 10.375" 16.25" 5.875"
31094 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 14.32" 23.125" 8.805"
31125 Shock Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 12.25" 20.75" 8.5"
31131 Shock Loop Bushing Mount - 11/16" Bushing ID X 1.9/16" Bushing OAL Loop Bushing Mount - 11/16" Bushing ID X 1.9/16" Bushing OAL 14.125" 23.375" 9.25"
31162 Shock Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 11.875" 19.375" 7.5"
31176 Shock Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 7.125" 10.625" 3.5"

 

img

Added to cart successfully!