Monroe Shock Measurements: 32404 to 33207

Monroe Shock Measurements: 32404 to 33207

ShockWarehouse

Monroe Shock Measurements: 32404 to 33207

Measurement reference 8 of 29. These 48 entries run from 32404 to 33207 in part-number order.

Compare the complete specification

Read Lower and Upper carefully: the table lists the lower mount before the upper mount. Loop sleeves, cross pins and stems require different hardware and mounting provisions. Mount descriptions may include sleeve ID, sleeve overall length, stem length and thread pitch. Preserve each requirement when comparing a replacement; matching compressed length alone is insufficient.

Confirm vehicle or chassis application, axle position and suspension changes before ordering. These dimensions are a comparison aid, not a substitute for the part’s application and installation requirements.

Part numbers and dimensions

  Mounts Lengths
SKU Part Type Lower Upper Comp. Ext. Trav.
32404 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 15.72" 24.68" 8.96"
32405 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/4" Sleeve OAL Special Mount 11.07" 16.38" 5.31"
32406 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 47.63MM Sleeve OAL 15.25" 24.32" 9.07"
32407 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 47.63MM Sleeve OAL 15.19" 24.88" 9.69"
32410 Shock Special Mount Stem Mount - Stem Length X M10 Thread Pitch 14.66" 21.42" 6.76"
33033 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 10.125" 14.625" 4.5"
33049 Shock Loop Bushing and Cantilever Pin Mount - 1/2" Stud Diameter X 1 1/16" Stud Length (Center of Loop to Frame) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 12.625" 21.25" 8.625"
33059 Shock Stud Plate Mount Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 9.5" 14.25" 4.75"
33074 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.3/8" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 34.93MM Sleeve OAL 11.875" 18.25" 6.375"
33076 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.3/8" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 34.93MM Sleeve OAL 9.93" 14.63" 4.7"
33082 Shock Loop Bushing and Cantilever Pin Mount - 1/2" Stud Diameter X 1 5/16" Stud Length (Center of Loop to Frame) Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/16" Pin Length (Hole Center to Center) 12.69" 20.76" 8.07"
33084 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1 5/8" Sleeve OAL Loop Bushing - 5/8" Bushing ID X 1 5/16" Bushing OAL 13.96" 22.9" 8.96"
33086 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.3/4" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 44.45MM Sleeve OAL 12.875" 21" 8.125"
33095 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 41.28MM Sleeve OAL 13.375" 21.5" 8.125"
33101 Shock Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1.11/16" Sleeve OAL Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 42.86MM Sleeve OAL 13.125" 16.25" 3.125"
33108 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 1.5/8" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 16.125" 21.25" 5.125"
33122 Shock Loop Bushing and Cantilever Pin Mount - 1/2" Stud Diameter X 1 1/16" Stud Length (Center of Loop to Frame) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 11.625" 18.75" 7.125"
33123 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.25" 14.625" 5.375"
33127 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/16" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.125" 13.75" 4.625"
33128 Shock Loop Bushing and Cantilever Pin Mount - 1/2" Stud Diameter X 1 1/16" Stud Length (Center of Loop to Frame) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 12.125" 19.5" 7.375"
33137 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 14.5" 19.125" 4.625"
33178 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 10" 14.5" 4.5"
33179 Shock Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1.11/16" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.1/2" Pin Length (Hole Center to Center) 14.31" 22.96" 8.65"
33180 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/4" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 8" 11.91" 3.88"
33181 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 14" 22.5" 8.5"
33182 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/4" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 8.25" 11.69" 3.44"
33183 Shock Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1.11/16" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 47.63MM Sleeve OAL 10.49" 16.04" 5.55"
33184 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 2.7/16" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.11/16" Sleeve OAL 14.45" 23.1" 8.65"
33185 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.9/16" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 18.3" 22.05" 3.75"
33187 Shock Loop Bushing and Sleeve Mount - 5/8"-16MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 15.21" 25.1" 9.89"
33188 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 60.33MM Sleeve OAL 11.55" 18.44" 6.89"
33189 Shock Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1.11/16" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 11.45" 17.77" 6.32"
33190 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 41.28MM Sleeve OAL 10.4" 14.91" 4.51"
33191 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 47.63MM Sleeve OAL 13.82" 21.84" 8.02"
33192 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 38.1MM Sleeve OAL 11.26" 16.78" 5.52"
33193 Shock Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1.7/8" Sleeve OAL Special Mount 10.28" 15.96" 5.68"
33194 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.1/2" Sleeve OAL Cross Pin Mount - Closed Ended, 3/8" Hole ID (Both Ends) X 4" Pin Length (Hole Center to Center) 14.01" 22.53" 8.52"
33195 Shock Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1.11/16" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 47.63MM Sleeve OAL 11.37" 17.67" 6.3"
33196 Shock Special Mount Stem Mount - 2.5/8" Stem Length X M10 Thread Pitch 16.54" 20.95" 4.41"
33197 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 2.7/8" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 12.45" 20.15" 7.7"
33198 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 2.1/8" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 12.46" 20.03" 7.57"
33200 Shock Loop Bushing and Sleeve Mount - 5/8"-16mm Sleeve ID X 1 9/16" Sleeve OAL Stem Mount - 2 11/16" Stem Length X 3/8"-16 Thread Pitch 15.18" 25.12" 9.94"
33201 Shock Loop Bushing and Sleeve Mount - 16MM Sleeve X 1.55" Sleeve OAL Loop Bushing and Sleeve Mount - 16MM Sleeve X 1.55" Sleeve OAL 11.69" 17" 5.32"
33202 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 50MM Sleeve OAL Stem Mount - 2 3/8" Stem Length X 3/8"-16 Thread Pitch 15.5" 26.07" 10.57"
33204 Shock Loop Bushing and Sleeve Mount - 12mm Sleeve ID X 1 3/4" Sleeve OAL Stem Mount - 1 7/8" Stem Length X M12 Thread Pitch 13.5" 16.65" 3.14"
33205 Shock - - 12.42" 17.33" 4.91"
33206 Shock Loop Bushing and Sleeve Mount - 5/8"-16mm Sleeve ID X 1 9/16" Sleeve OAL Stem Mount - 2 11/16" Stem Length X 3/8"-16 Thread Pitch 15.69" 26.43" 10.74"
33207 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1 11/16" Sleeve OAL Loop Bushing and Sleeve Mount - 12mm Sleeve ID X 1 13/16" Sleeve OAL 10.49" 16.04" 5.55"

 

img

Added to cart successfully!