Monroe Shock Measurements: 34756 to 34832

Monroe Shock Measurements: 34756 to 34832

ShockWarehouse

Monroe Shock Measurements: 34756 to 34832

Measurement reference 11 of 29. These 47 entries run from 34756 to 34832 in part-number order.

Compare the complete specification

Read Lower and Upper carefully: the table lists the lower mount before the upper mount. Loop sleeves, cross pins and stems require different hardware and mounting provisions. Mount descriptions may include sleeve ID, sleeve overall length, stem length and thread pitch. Preserve each requirement when comparing a replacement; matching compressed length alone is insufficient.

Confirm vehicle or chassis application, axle position and suspension changes before ordering. These dimensions are a comparison aid, not a substitute for the part’s application and installation requirements.

Part numbers and dimensions

  Mounts Lengths
SKU Part Type Lower Upper Comp. Ext. Trav.
34756 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.1/2" Pin Length (Hole Center to Center) 14" 22.75" 8.75"
34759 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 12.5" 19.875" 7.375"
34760 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.875" 14.625" 4.75"
34761 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 13.125" 21.75" 8.625"
34762 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 13.875" 22.5" 8.625"
34763 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 14.625" 23.875" 9.25"
34766 Shock Cross Pin Mount - Closed Ended, 3/8" Hole ID (Both Ends) X 2.3/4" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 13.12" 20.25" 7.13"
34767 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 15.25" 25.25" 10"
34769 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.11/16" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 36.51MM Sleeve OAL 13.8" 21.81" 8.01"
34770 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 16.19" 27.01" 10.82"
34771 Shock Loop Bushing Mount - 11/16" Bushing ID X 1.9/16" Bushing OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 41.28MM Sleeve OAL 16.625" 28.5" 11.875"
34776 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch 9.5" 13.75" 4.25"
34777 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL 15.375" 24.625" 9.25"
34778 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch 13.875" 21.75" 7.875"
34781 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL 15.75" 26.125" 10.375"
34782 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch 14.375" 22.75" 8.375"
34785 Shock Cross Pin Mount - Closed Ended, 1/2" Hole ID (Both Ends) X 3 3/8" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 8.72" 12.8" 4.08"
34786 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 41.28MM Sleeve OAL 14.59" 22.69" 8.1"
34787 Shock Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch 14.25" 23.25" 9"
34788 Shock Loop Bushing Mount - 3/4" Bushing ID X 1.9/16" Bushing OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 14.375" 23.25" 8.875"
34789 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 41.28MM Sleeve OAL 15.34" 24.57" 9.23"
34790 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.72" 14.8" 5.08"
34791 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 16.125" 27.25" 11.125"
34793 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 10.125" 15" 4.875"
34794 Shock Cross Pin Mount - Open Ended, 5/16" Hole ID (Both Ends) X 3" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.25" 13.625" 4.375"
34795 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL 16.42" 25.53" 9.11"
34796 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.375" 14.25" 4.875"
34797 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 14" 22.25" 8.25"
34798 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 2.7/16" Sleeve OAL 11.375" 16.5" 5.125"
34799 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 2.7/16" Sleeve OAL 11.75" 15.875" 4.125"
34800 Shock Cross Pin Mount - Open Ended, 3/8" Hole ID (Both Ends) X 2.5/8" Pin Length (Hole Center to Center) Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch 9.63" 13.77" 4.14"
34802 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 14" 22.75" 8.75"
34803 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 13.25" 21" 7.75"
34804 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.1/2" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 13.59" 18.11" 4.52"
34810 Shock Clevis Bracket Mount Cross Pin Mount - Closed Ended, 1/2" Hole ID (Both Ends) X 3 3/4" Pin Length (Hole Center to Center) 13.76" 17.97" 4.15"
34811 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL 16.21" 25.32" 9.11"
34812 Shock Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1.11/16" Sleeve OAL Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 42.86MM Sleeve OAL 15.34" 22.35" 7.01"
34813 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.11/16" Sleeve OAL Stem Mount - 3.5/16" Stem Length X 5/8"-11 Thread Pitch 14.51" 24.07" 9.56"
34814 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch 14.75" 21.38" 6.63"
34815 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 5/8" Sleeve ID X 1.11/16" Sleeve OAL 15.18" 24.43" 9.25"
34816 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 5/8" Sleeve ID X 1.11/16" Sleeve OAL 14.46" 22.96" 8.5"
34817 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.5/16" Sleeve OAL Loop Bushing and Cantilever Pin Mount - 1/2" Stud Diameter X 1 1/16" Stud Length (Center of Loop to Frame) 9.875" 14.625" 4.75"
34821 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 14.25" 22.875" 8.625"
34822 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.3/8" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 34.93MM Sleeve OAL 13.875" 22.75" 8.875"
34824 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Cantilever Pin Mount - 1/2" Stud Diameter X 1 1/16" Stud Length (Center of Loop to Frame) 14" 22.875" 8.875"
34831 Shock Cross Pin Mount - Open Ended, 5/16" Hole ID (Both Ends) X 3" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 8.875" 13.375" 4.5"
34832 Shock Loop Bushing Mount - 11/16" Bushing ID X 1.9/16" Bushing OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 41.28MM Sleeve OAL 14.75" 24.375" 9.625"

 

img

Added to cart successfully!