Monroe Shock Measurements: 37035 to 37104

Monroe Shock Measurements: 37035 to 37104

ShockWarehouse

Monroe Shock Measurements: 37035 to 37104

Measurement reference 13 of 29. These 46 entries run from 37035 to 37104 in part-number order.

Compare the complete specification

Read Lower and Upper carefully: the table lists the lower mount before the upper mount. Loop sleeves, cross pins and stems require different hardware and mounting provisions. Mount descriptions may include sleeve ID, sleeve overall length, stem length and thread pitch. Preserve each requirement when comparing a replacement; matching compressed length alone is insufficient.

Confirm vehicle or chassis application, axle position and suspension changes before ordering. These dimensions are a comparison aid, not a substitute for the part’s application and installation requirements.

Part numbers and dimensions

  Mounts Lengths
SKU Part Type Lower Upper Comp. Ext. Trav.
37035 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 15" 25.125" 10.125"
37036 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 11.625" 18.375" 6.75"
37037 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 13.5" 21.75" 8.25"
37038 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 15" 24.75" 9.75"
37040 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.3/8" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 34.93MM Sleeve OAL 11.875" 18.375" 6.5"
37041 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Cantilever Pin Mount - 5/8" Stud Diameter X 1 5/16" Stud Length (Center of Loop to Frame) 14.125" 22.875" 8.75"
37044 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 16.125" 26.75" 10.625"
37045 Shock Loop Bushing Mount - 11/16" Bushing ID X 1.9/16" Bushing OAL Loop Bushing Mount - 11/16" Bushing ID X 1.9/16" Bushing OAL 13.125" 20.25" 7.125"
37046 Shock Loop Bushing Mount - 11/16" Bushing ID X 1.9/16" Bushing OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 41.28MM Sleeve OAL 15.75" 26.125" 10.375"
37047 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/4" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 8.125" 12.125" 4"
37049 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.5/16" Sleeve OAL Loop Bushing and Cantilever Pin Mount - 5/8" Stud Diameter X 1 5/16" Stud Length (Center of Loop to Frame) 10" 14.625" 4.625"
37050 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.1/2" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.5" 13.75" 4.25"
37052 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 14.375" 23" 8.625"
37053 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 10.75" 15.875" 5.125"
37058 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/16" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 8.5" 12.375" 3.875"
37061 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 41.28MM Sleeve OAL 12" 18.125" 6.125"
37062 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 2.7/16" Sleeve OAL 11.25" 16.5" 5.25"
37063 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.1/2" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.25" 14" 4.75"
37064 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.11/16" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 42.86MM Sleeve OAL 14.75" 23.125" 8.375"
37066 Shock Cross Pin Mount - Open Ended, 5/16" Hole ID (Both Ends) X 2.3/8" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 8.625" 13" 4.375"
37067 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.5/8" Sleeve OAL Cross Pin Mount - Open Ended, 5/16" Hole ID (Both Ends) X 3" Pin Length (Hole Center to Center) 14.625" 23.5" 8.875"
37068 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.3/8" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.75" 15" 5.25"
37069 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.5/8" Sleeve OAL Cross Pin Mount - Open Ended, 5/16" Hole ID (Both Ends) X 3" Pin Length (Hole Center to Center) 15.625" 26.25" 10.625"
37070 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 12.125" 18.25" 6.125"
37072 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.1/2" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.375" 14.5" 5.125"
37073 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 13" 20.75" 7.75"
37077 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/4" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 8.875" 13.75" 4.875"
37078 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 12.625" 20" 7.375"
37080 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 12.5" 20.75" 8.25"
37081 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/16" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 13" 20.75" 7.75"
37082 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.7/16" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 13.625" 21.5" 7.875"
37083 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/16" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 13.25" 21.125" 7.875"
37085 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 14" 22.375" 8.375"
37086 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 14.625" 23.75" 9.125"
37087 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 15.375" 25.25" 9.875"
37090 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.3/8" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 34.93MM Sleeve OAL 9.93" 14.63" 4.7"
37091 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 41.28MM Sleeve OAL 13.125" 20.875" 7.75"
37093 Shock Cross Pin Mount - Open Ended, 5/16" Hole ID (Both Ends) X 3" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 8.875" 13.25" 4.375"
37094 Shock Loop Bushing Mount - 11/16" Bushing ID X 1.9/16" Bushing OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 41.28MM Sleeve OAL 14.875" 24.375" 9.5"
37095 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 10.125" 14.625" 4.5"
37096 Shock Cross Pin Mount - Open Ended, 5/16" Hole ID (Both Ends) X 3" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 8.875" 13.375" 4.5"
37098 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 11.75" 18.25" 6.5"
37099 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 41.28MM Sleeve OAL 11.625" 16.5" 4.875"
37101 Shock Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 15.125" 24.875" 9.75"
37102 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch 9.5" 13.75" 4.25"
37104 Shock Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1.11/16" Sleeve OAL Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch 13.74" 22.01" 8.27"

 

img

Added to cart successfully!