Monroe Shock Measurements: 37387 to 40209

Monroe Shock Measurements: 37387 to 40209

ShockWarehouse

Monroe Shock Measurements: 37387 to 40209

Measurement reference 17 of 29. These 51 entries run from 37387 to 40209 in part-number order.

Compare the complete specification

Read Lower and Upper carefully: the table lists the lower mount before the upper mount. Loop sleeves, cross pins and stems require different hardware and mounting provisions. Mount descriptions may include sleeve ID, sleeve overall length, stem length and thread pitch. Preserve each requirement when comparing a replacement; matching compressed length alone is insufficient.

Confirm vehicle or chassis application, axle position and suspension changes before ordering. These dimensions are a comparison aid, not a substitute for the part’s application and installation requirements.

Part numbers and dimensions

  Mounts Lengths
SKU Part Type Lower Upper Comp. Ext. Trav.
37387 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1 5/8" Sleeve OAL Cross Pin Mount - Close Ended, 3/8 Hole 14.07" 20.85" 6.52"
37389 Shock Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2 7/8" Pin Length (Hole Center to Center) Stem Mount - Stem Length 1.260" - M10 X 1.50 Thread Pitch 13.18" 20.18" 7"
37390 Shock Loop Bushing and Sleeve Mount - 14mm Sleeve ID X 3 1/8" Sleeve OAL Stem Mount - 1 3/16" Stem Length X M10 Thread Pitch 13.98" 22.98" 9"
37393 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve X 1.57" Sleeve OAL Stem Length 1" X 8MM - 1.25 Pitch Thread 19.3" 29.04" 9.74"
37394 Shock Loop Bushing and Sleeve Mount - 14MM Sleeve X 1.55" Sleeve OAL Stem Mount - 2" Stem Length X M10 Pitch Thread 18.48" 25.78" 7.3"
37395 Shock Loop Bushing and Sleeve Mount - 14mm Sleeve ID X 1 9/16" Sleeve OAL Stem Mount - 2" Stem Length X M10 Thread Pitch 20.05" 26.33" 6.28"
37398 Shock Loop Bushing and Sleeve Mount - 3/4" Sleeve ID X 1 7/8" Sleeve OAL Stem Mount - 2 5/8" Stem Length X 1/2"-13 Thread Pitch 13.94" 22.21" 8.27"
37399 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 2 7/16" Sleeve OAL Stem Mount - 2" Stem Length X M10 Thread Pitch 14.95" 22.87" 7.92"
37400 Shock Loop Bushing and Sleeve Mount - 5/8"-16mm Sleeve ID X 1 9/16" Sleeve OAL Cross Pin Mount - Closed Ended, 3/8" Hole ID (Both Ends) X 4" Pin Length (Hole Center to Center) 12.6" 18.75" 6.14"
37406 Shock Loop Bushing and Sleeve Mount - 12mm Sleeve ID X 2 1/8" Sleeve OAL Stem Mount - 1 7/8" Stem Length X M10 Thread Pitch 14.63" 23.23" 8.6"
37407 Shock Loop Bushing and Sleeve Mount - 12mm Sleeve ID X 2 1/8" Sleeve OAL Stem Mount - 1 7/8" Stem Length X M10 Thread Pitch 15.49" 24.73" 9.24"
37409 Shock Loop Bushing and Sleeve Mount - 10mm Sleeve ID X 1 9/16" Sleeve OAL Stem Mount - 3 3/16" Stem Length X M10 Thread Pitch 17.13" 26.99" 9.56"
37411 Shock Loop Bushing and Sleeve Mount - 12mm Sleeve ID X 1 1/2" Sleeve OAL Stem Mount - 1" Stem Length X M8 Thread Pitch 16.02" 26.39" 10.35"
37412 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1 5/8" Sleeve OAL Stem Mount - 3 1/16" Stem Length X 1/2"-13 Thread Pitch 15.89" 24.78" 8.9"
37416 Shock Loop Bushing and Sleeve Mount - 14mm Sleeve ID X 1 9/16" Sleeve OAL Loop Bushing and Sleeve Mount - 14mm Sleeve ID X 1 9/16" Sleeve OAL 17.53" 24.04" 6.51"
37417 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1 1/2" Sleeve OAL Stem Mount - 2 1/4" Stem Length X 3/8"-24 Thread Pitch 12.81" 16.29" 3.47"
37418 Shock Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1 7/8" Sleeve OAL Stem Mount - 1 7/8" Stem Length X M12 Thread Pitch 13" 20.11" 7.1"
37419 Shock Loop Bushing and Sleeve Mount - 12mm Sleeve ID X 1 9/16" Sleeve OAL Loop Bushing and Sleeve Mount - 12mm Sleeve ID X 1 9/16" Sleeve OAL 15.13" 24.75" 9.63"
37420 Shock Loop Bushing and Sleeve Mount - 5/8"-16mm Sleeve ID X 2" Sleeve OAL Stem Mount - 1 7/8" Stem Length X M12 Thread Pitch 13.43" 18.62" 5.24"
37421 Shock Loop Bushing and Sleeve Mount - 12mm Sleeve ID X 1 3/4" Sleeve OAL Loop Bushing and Sleeve Mount - 12mm Sleeve ID X 1 3/4" Sleeve OAL 11.27" 16.34" 5.07"
37426 Shock Loop Bushing and Sleeve Mount - 12mm Sleeve ID X 2 1/8" Sleeve OAL Stem Mount - 1 7/8" Stem Length X M10 Thread Pitch 15.13" 23.61" 8.48"
37434 Shock Loop Bushing and Sleeve Mount - 14mm Sleeve ID X 2 7/16" Sleeve OAL Stem Mount - 1 7/8" Stem Length X M10 Thread Pitch 15.66" 22.65" 6.99"
37438 Shock Loop Bushing and Sleeve Mount - 12mm Sleeve ID X 2 3/8" Sleeve OAL Stem Mount - 1 1/4" Stem Length X M10 Thread Pitch 16.13" 24.84" 8.71"
39002 Shock Special Mount Stem Mount - Stem Length X M10 Thread Pitch 13.625" 18.375" 4.75"
39006 Shock Cross Pin Mount - Closed Ended, 3/8" Hole ID (Both Ends) X 2.3/4" Pin Length (Hole Center to Center) Stem Mount - Stem Length X M10 Thread Pitch 11.25" 17.5" 6.25"
39020 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 1.9/16" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 18.937" 21.496" 2.559"
39021 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 1.9/16" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 18.543" 19.764" 1.221"
39028 Shock Special Mount Stem Mount - Stem Length X M10 Thread Pitch 9.875" 14" 4.125"
39040 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 2.7/8" Sleeve OAL Stem Mount - Stem Length X M12 Thread Pitch 11.125" 17" 5.875"
39044 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 1.9/16" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 17.75" 18.875" 1.125"
39045 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 1.9/16" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 16.5" 18.25" 1.75"
39047 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 1.9/16" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 18.875" 22.5" 3.625"
39051 Shock Special Mount Stem Mount - Stem Length X M12 Thread Pitch 14.75" 18.625" 3.875"
39052 Shock Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1.5/16" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 2.1/4" Sleeve OAL 11.02" 15.55" 4.53"
39102 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 2.3/8" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 15" 24" 9"
39107 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 17.13" 25.51" 8.38"
39108 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 2" Sleeve OAL Stem Mount - 2.5/8" Stem Length X M10 Thread Pitch 19.02" 23.19" 4.17"
39109 Shock Loop Bushing and Sleeve Mount - 10MM Sleeve ID X 2" Sleeve OAL Stem Mount - 2.5/8" Stem Length X M10 Thread Pitch 18.5" 20.71" 2.21"
39111 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.7/16" Sleeve OAL Stem Mount - 1.1/8" Stem Length X M8 Thread Pitch 16.65" 24.98" 8.33"
39114 Shock Clevis Bracket Mount Stem Mount - Stem Length X M10 Thread Pitch 15.31" 21.86" 6.55"
39129 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.7/16" Sleeve OAL Stem Mount - 1.1/8" Stem Length X M8 Thread Pitch 20.23" 28.27" 8.04"
39130 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.7/8" Sleeve OAL Stem Mount - Stem Length X M10 Thread Pitch 16.06" 23.23" 7.17"
39136 Shock Cross Pin Mount - Closed Ended, 1/2" Hole ID (Both Ends) X 3 3/4" Pin Length (Hole Center to Center) Stem Mount - Stem Length X M10 Thread Pitch 17.21" 22.6" 5.39"
40034 Shock Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1,9/16" Sleeve OAL Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 39.69MM Sleeve OAL 15.25" 22.75" 7.5"
40044 Shock Special Mount Stem Mount - Stem Length X M10 Thread Pitch 11" 15.375" 4.375"
40050 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.11/16" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 42.86MM Sleeve OAL 15.38" 22.75" 7.37"
40051 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.11/16" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 42.86MM Sleeve OAL 15.38" 22.75" 7.37"
40052 Shock Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.11/16" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 42.86MM Sleeve OAL 15.38" 22.75" 7.37"
40056 Shock Clevis Bracket Mount Stem Mount - Stem Length X M10 Thread Pitch 15" 21.88" 6.88"
40201 Shock Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 2.7/16" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 2.7/16" Sleeve OAL 11.625" 17.875" 6.25"
40209 Shock Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1,9/16" Sleeve OAL Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 39.69MM Sleeve OAL 14.875" 22.875" 8"

 

img

Added to cart successfully!