Rancho Shock and Strut Measurements: RS55180 to RS55267

Rancho Shock and Strut Measurements: RS55180 to RS55267

ShockWarehouse

Rancho Shock and Strut Measurements: RS55180 to RS55267

Measurement reference 3 of 13. These 45 entries run from RS55180 to RS55267 in part-number order.

Compare the complete specification

The Strut Body columns add type and body length where listed. Read those together with Part Type; a blank or dash does not establish a strut-body specification. The mount descriptions include sleeve inside diameter, overall length, stem length and thread details where available. Match all relevant dimensions rather than comparing only the bolt diameter.

Confirm vehicle or chassis application, axle position and suspension changes before ordering. These dimensions are a comparison aid, not a substitute for the part’s application and installation requirements.

Part numbers and dimensions

  Strut Body Mounts Lengths
SKU Part Type Type Length Lower Upper Comp. Ext. Trav.
RS55180 Shock - - Loop Bushing Mount - 3/4" Bushing ID X 1.9/16" Bushing OAL Loop Bushing Mount - 3/4" Bushing ID X 1.9/16" Bushing OAL 13.69" 21.47" 7.78"
RS55185 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 15.51" 25.42" 9.91"
RS55187 Shock - - Loop Bushing Mount - 3/4" Bushing ID X 1.9/16" Bushing OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 12.34" 19.81" 7.47"
RS55188 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/4" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 8.87" 12.7" 3.83"
RS55190 Shock - - Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1.11/16" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/8" Pin Length (Hole Center to Center) 16.08" 26.36" 10.28"
RS55194 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.7/16" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 14.41" 22.31" 7.9"
RS55195 Shock - - Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Stem Mount - 2 5/8" Stem Length X 1/2"-13 Thread Pitch 9.57" 13.82" 4.25"
RS55197 Shock - - Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Stem Mount - 2 5/8" Stem Length X 1/2"-13 Thread Pitch 13.66" 22.06" 8.4"
RS55198 Shock - - Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL 15.69" 25.59" 9.9"
RS55199 Shock - - Cross Pin Mount - Open Ended, 5/16" Hole ID (Both Ends) X 3" Pin Length (Hole Center to Center) Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch 9.25" 13.44" 4.2"
RS55207 Shock - - Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch 14.29" 23.32" 9.03"
RS55208 Shock - - Loop Bushing Mount - 3/4" Bushing ID X 1.9/16" Bushing OAL Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch 14.04" 22.7" 8.66"
RS55214 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/4" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.67" 14.32" 4.65"
RS55215 Shock - - Loop Bushing Mount - 3/4" Bushing ID X 1.9/16" Bushing OAL Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.1/2" Sleeve OAL 12.78" 19.81" 7.03"
RS55221 Shock - - Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1.11/16" Sleeve OAL Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch 14.59" 23.63" 9.04"
RS55222 Shock - - Cross Pin Mount - Closed Ended, 3/8" Hole ID (Both Ends) X 2.3/4" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.42" 13.7" 4.28"
RS55226 Shock - - Loop Bushing Mount - 3/4" Bushing ID X 1.9/16" Bushing OAL Loop Bushing Mount - 3/4" Bushing ID X 1.9/16" Bushing OAL 13.19" 20.34" 7.15"
RS55227 Shock - - Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1.11/16" Sleeve OAL Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.1/2" Pin Length (Hole Center to Center) 17.33" 29.56" 12.24"
RS55229 Shock - - Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.1/2" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 13.72" 18.25" 4.53"
RS55233 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.9/16" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 9.84" 14.37" 4.53"
RS55234 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 16.13" 27.03" 10.9"
RS55235 Shock - - Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.1/2" Pin Length (Hole Center to Center) Stem Mount - 2.5/8" Stem Length X 1/2"-13 Thread Pitch 10.24" 15" 4.76"
RS55236 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 14.5" 24.03" 9.53"
RS55237 Shock - - Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.5/8" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 11.59" 18" 6.41"
RS55238 Shock - - Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.1/2" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 16.88" 29.09" 12.21"
RS55239 Shock - - Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/16" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 14.43" 23.84" 9.41"
RS55240 Shock - - Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.3/8" Sleeve OAL Cross Pin Mount - Open Ended, 3/8" Hole ID (Both Ends) X 3.3/16" Pin Length (Hole Center to Center) 12.76" 20.04" 7.28"
RS55241 Shock - - Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.3/8" Sleeve OAL Cross Pin Mount - Open Ended, 3/8" Hole ID (Both Ends) X 3.3/16" Pin Length (Hole Center to Center) 13.51" 21.67" 8.16"
RS55244 Shock - - Loop Bushing and Sleeve Mount - 1" Sleeve ID X 1.3/4" Sleeve OAL Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 2.7/16" Sleeve OAL 13.76" 22.39" 8.63"
RS55245 Shock - - Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL Cross Pin Mount - Open Ended, 3/8" Hole ID (Both Ends) X 3.3/16" Pin Length (Hole Center to Center) 15.01" 24.67" 9.66"
RS55246 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL 14.21" 23" 8.79"
RS55248 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.5/8" Sleeve OAL 15.36" 25.24" 9.88"
RS55251 Shock - - Loop Bushing and Sleeve Mount - 14MM Sleeve ID X 1,9/16" Sleeve OAL Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 16.02" 27.06" 11.03"
RS55254 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 18.26" 30.83" 12.57"
RS55254A Shock - - Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 18.32" 30.85" 12.53"
RS55255 Shock - - Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.7/16" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 15.8" 26.53" 10.73"
RS55256 Shock - - Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1.3/8" Sleeve OAL Cross Pin Mount - Open Ended, 3/8" Hole ID (Both Ends) X 3.3/16" Pin Length (Hole Center to Center) 15.01" 24.67" 9.66"
RS55259 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.7/16" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 13.49" 21.51" 8.02"
RS55260 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.7/16" Sleeve OAL Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.3/4" Sleeve OAL 13.64" 21.54" 7.9"
RS55261 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 19.01" 32.98" 13.97"
RS55262 Shock - - Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL Loop Bushing and Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL 15.08" 23.89" 8.81"
RS55263 Shock - - Cross Pin Mount - Closed Ended, 5/16" Hole ID (Both Ends) X 2.1/2" Pin Length (Hole Center to Center) Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 10" 14.45" 4.45"
RS55264 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 15.26" 24.42" 9.16"
RS55265 Shock - - Clevis Bracket Mount Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch 11.02" 15.31" 4.29"
RS55267 Shock - - Loop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2" Sleeve OAL Loop Bushing Mount - 5/8" Bushing ID X 1.5/16" Bushing OAL 14.26" 22.92" 8.66"

 

img

Added to cart successfully!