M&P USA GM MagneRide Shock & Ride Height Bypass Delete Kit MPUSA108 Compatible with 2005-2012 Cadillac, Chevrolet & GMC

Mods & Projects' kit is plug & play compatible with most 2005-2012. For a direct-fit, plug & play compatibility the connector should look like the connector on our electronic strut bypass module (or the alternate style connector image image), if it looks different (Buick etc.) you will need to purchase a separate, inexpensive universal adapter. Refer to the enclosed, detailed instructions for the full procedure!

• Plug & Play for most 2005-2012 Cadillac, Chevrolet, GMC vehicle applications.
• IMPORTANT ONE kit per axle (Front OR Rear). TWO kits are required for the Front AND Rear.
• Proudly made AND supported in the USA! Covered by M&P's LIFETIME Warranty Replacement Guarantee.
• GM MagneRide-equipped Trucks & SUVs REQUIRE Ride Height Simulators to prevent damage to shock sensors.
• Direct OEM weatherproof sealed connection guarantees durability & longevity. Unlike the cheap crimp connections used in some other kits, M&P's kit will last the lifetime of the vehicle.

Compatibility Chart

• 2005-2012 Cadillac CTS, CTS-V
• 2005-2012 Cadillac Escalade
• 2005-2012 Chevrolet Corvette (C6)
• 2005-2012 Chevrolet Suburban
• 2005-2012 Chevrolet Tahoe
• 2005-2012 GMC Sierra Denali
• Other Trucks and SUV's that use the SAME style connector shown above.

Instructions

Install the 3-pin ride height simulators first, then install 2-pin shock/strut simulators!

Securing the electronic strut bypass module to your vehicle:

Secure your ride height simulators by looping the included zip ties through the through-hole on the casing. Secure the Strut bypass units using the larger zip ties. A good location for this is the factory wiring harness. It’s already secured to the frame of your car via this clip right here. The best location will vary based on your vehicle, just find somewhere secure to zip tie the bypass in place.